Guide to buying ergonomic chairs for petite people with a height of 150cm

Mar 22, 2025

Leave a message

Quality Gaming ChairGuide to buying ergonomic chairs for petite people with a height of 150cm
Purchasing ergonomic chairs for petite people


My height is barely 150cm with shoes on, and about 145cm barefoot. I want to share some experience in choosing chairs with girls who are also petite, hoping to give you some help

 

First of all, the most important hard parameters for height are as follows, which are given based on the parameters of the suitable chairs I have bought for my height of 1.45m:


Seat height
Seat height 45cm, both feet on the ground when wearing slippers
Seat height 47cm, toes on the ground when wearing slippers, and both feet can be sitting on the ground when wearing height-increasing sports shoes (heels of about 3cm)
So the seat height within 48 is considered a safe zone

 

Seat depth
Seat depth 40, when fully seated, the calf can be 1-2cm away from the front frame of the seat, which is a comfortable state. Any smaller may not be good
The seat depth is 44-45. When fully seated, the calf just touches the front frame, but it is not uncomfortable. If the seat depth is deeper, it may cause panic and cause you to sit forward involuntarily, and then the lower back cannot be supported.

 

Neck pillow
I bought 6 chairs, and almost all the neck pillows have to be removed, so I don't know how high the chair back should be to ensure the position of the neck pillow is appropriate. I can give you a reference. If the chair back height is 97.5cm, it is difficult for the headrest to be properly supported. Basically, if your chair is higher than this parameter, the headrest is not suitable. So basically only chairs designed for small people can meet this requirement. If you have a suitable headrest, you can also tell me the height of the chair back in the comment area~

Brown Leather Gaming Chair

Lumbar support
It is best to buy a mesh lumbar support instead of a plastic one, and the lumbar support should have as many adjustment functions as possible. The lumbar support has two additional functions, one is waist tracking, and the other is front and rear elastic locking.
Because I think the reason why ergonomic chairs can make people feel comfortable is because of its "customization" performance, which is that it can change the sitting posture frequently. No matter how it changes, it can protect your waist and back, so I basically open the reclining lock to sit and change the posture at any time, so if it can adjust the waist, it will be very convenient. However, in general, the adjustment range of the waist support does not need to be particularly large in actual use. When reclining, it mainly needs to float up and down. When sitting upright, it needs to adjust forward and backward, and when turning, it needs to float left and right. So you can look at your own needs. The main thing is that the up and down adjustment plus a little bit of self-adaptation can basically meet the basic needs of most people. On this basis, it is better to meet the six-way control.

Big Gaming Chair

Reclining
If you have a bad waist and the budget can reach more than 1k, I strongly recommend buying a chair with an adaptive chassis. The strength of its reclining is based on your weight, so you can hover when reclining, so your reclining angle can be changed at any time. The so-called long-term sitting, if you can change your sitting posture frequently, I think it is the most important ergonomics. Secondly, even if there is no adaptive chassis, it is ok to use the knob damping to adjust the reclining force. It can achieve freedom within a certain range and can also relax your sitting posture.

Send Inquiry